• Home
  • Aberlink CMMs
  • Tomerelli Portable Arms
  • Sobekk Vision
  • Contact
    • Dealers
  • Used CMMs
  • CMM Services
    • CMM Calibration
    • CMM Training
    • Order Onsite & Video Classes
  • CMM Upgrades/Retrofit
    • CMM & Portable Arm Software Retrofits
    • CMM Hardware Retrofits
  • CMM Accessories
    • CMM SPC Software
    • CMM Fixturing
  • Finance
  • Blog
  • References
  • Accreditations
Masters Precision Inc "Precision at an Affordable Price"
Connect with Us!

Increasing Productivity of Part Inspection

4/1/2019

0 Comments

 
One of the key items facing smaller shops today is increasing productivity in the manufacturing environment.   The time when machine tools sit idle is extremely costly. A significant road block to keeping them productive waiting for parts to be inspected or new features to be checked by QA. Taking the part to a QA area and having a specialized Quality Inspector or Programmer, then waiting for the inspection to be completed on the part can take minutes to hours and in cases of the absence of the inspector the part can go unchecked for a day or multiple parts can be run that are not in specification leading to increased scrap.   
Attempts have been made to help eliminate this type of back up by bring inspection devices to the floor, but these devices have come up short in three areas, first is handling temperature fluctuations that can exist on the floor and second the need to still have some kind of dedicated operational personnel to create programs, and finally the prohibitive price to purchase and the cost of ownership in the long term
Aberlink has provided a solution to all of the issues, starting with the easiest to use software in the market, Mark IV, so that in a very short time, in many cases less than a day, machine operators can be taught how to use the Aberlink CMM or Vision system.
Next comes the Aberlink line of CMMs from the shop hardened Xtreme series, with built in thermal control, allowing the Xtreme to operate in any environment with just a simple 110V connection, to the Axiom, Zenith and Azimuth lines with built in temperature compensation, Mark Iv the easiest to use software and a full line of probing options, from touch probe to scanning to vision all running under one homogenous software system.
Finally, all of this is done at an extremely affordable price with full CNC machines starting under 30K and a substantially reduced cost of ownership with things such as software upgrades and support for life, saving thousands over your typical software, all training done onsite, open technology to allow you to use the most economic sources for support.
No longer does QA have to be a bottleneck or unaffordable look to Aberlink and Masters Precision to provide you with your quality solution
Masters Precision
810-223-6315
Sales@mastersprecision.com
www.MastersPrecision.com

0 Comments

    Author

    Don Ward
    Manager Sales and Consulting

    Archives

    April 2020
    March 2020
    February 2020
    December 2019
    November 2019
    October 2019
    September 2019
    July 2019
    April 2019
    July 2018
    April 2018
    March 2018
    January 2018
    December 2017
    October 2017
    August 2017
    June 2017
    May 2017

    Categories

    All

    RSS Feed

CMM Sales

Aberlink CMMs
RPS Portable Arms
Used CMMs

CMM Services

Onsite & Video Classes
​
CMM Calibration

CMM Upgrades/Retrofits

CMM & Portable Arm Software Retrofits
CMM Hardware Retrofits

CMM Probing

Laser Probe
Video Probe

CMM Accessories

SPC Software
Fixturing

Masters Precision

Finance
Blog
References
Accreditations
© COPYRIGHT 2020. ALL RIGHTS RESERVED.